500-ton mechanical steel silo


Includes adapter, chute, and spiral staircase extension; oxygen, acetylene, welding rods, paint, etc.

Serial NumberNameModel NumberUnitQuantityPower (kW) Remarks
StandaloneTotal
Part One: Warehouse Section
Storage barrelTC82x10Cseat  1. Silo top angle: 25 degrees; cone base angle: 45 degrees. 
2. Silo capacity: 700 cubic meters; capacity weight: 525 tons; silo diameter: 8.25 meters; total height: 18.4 meters; silo cylinder height: 11.27 meters. 
3. Casing material: Premium double-sided patterned galvanized steel plate with 275g/m² zinc coating on both sides. Roof plate: Aluminum-zinc coated steel plate thickness: Layer 1: 1.50mm, Layers 2-3: 1.0mm, Layers 4-6: 1.5mm, Layers 7-9: 2.0mm, Layer 10: 2.5mm. 
4. External M-type galvanized columns, approximately 312mm wide. Column thickness: 3.0mm for layers 1-5, 4.0mm for layers 6-10. 
5. Entire steel cone base painted. Column base material: H244×175. Tie rod material: 50×5 angle steel. Cone base plate thickness: δ4–5mm. 
6. Silo top equipped with 1 manhole for maintenance. Silo cylinder equipped with 1 silo door. Inside silo: 1 vertical ladder. Outside silo: 1 vertical ladder from ground level to lower silo door. 
7. Field installation. Silo corrugated panels are manufactured using cold-rolled profiles through punching, bending, and shearing production lines, ensuring high precision. Both silo roof and cylinder sections utilize Grade 8.8 high-strength galvanized bolts. Critical load-bearing areas employ Grade 10.9 high-strength galvanized bolt assemblies, with a service life of 30 years.
Silo Roof Ventilation SystemSF4-2Set1.5 1.5 Each silo roof is equipped with one SF4-2 axial fan (1.5 kW) for silo roof use. Features a rain cap, meets national standards, low-voltage design, rotational speed: 2800 r/min, total pressure: 380 Pa, airflow: 11000 m³/h. Removes moisture from the silo interior, includes fan base and cover; two sets of natural ventilation windows are installed.
Cone-bottom ventilation systemTF8.2Set7.5 7.5 One unit per silo, 4-72-No.4.5A fan, 7.5 kW power rating per unit, national standard product, low-pressure fan, speed: 2900 r/min, total pressure: 1673-2554 Pa, airflow: 5730~10580 m³/h; Domestic motor, includes ventilation ring duct and cage-type ventilation pipe, pressure-resistant ring duct beneath silo, stamped-formed for more uniform ventilation, effectively preventing grain spoilage.
Temperature Measurement SystemCW8.2Set  Armored temperature measurement cables are evenly distributed throughout the silo. The PLC touchscreen temperature monitor provides real-time temperature monitoring, automatic fan start/stop upon excessive temperatures, material level monitoring and alarms, historical temperature curve recording and storage, silo temperature control visualization, and equipment overload alarms. Temperature measurement range: 10°C–80°C, or: -55°C–125°C; Temperature measurement accuracy: ±1°C; Temperature measurement humidity: ±4.1%; Vertical spacing between temperature measurement points: 2m. Upon detecting anomalies, promptly ventilate to cool down or remove the grain from the silo.
Level GaugeRotary Paddleone0.1 0.2 1. Level Detection Method: Rotary Paddle Type 2. Medium Temperature: -30°C to +80°C 3. Upper Level Probe Length: 1000mm 4. Blade Rotation Speed: 1 rpm Equipped with audible and visual alarms
Part Two: Cleaning the Conveying Section
HoistTDTG50/28M26 7.57.5Production Capacity: 50 tons/hour First-stage rubber-coated rollers Anti-reverse mechanism Hardened gear reducer Cylinder constructed with 2mm galvanized steel plate edge-seamed for enhanced rigidity Head frame constructed with 3-5mm galvanized steel plate, featuring bottom access door and inspection port. Components utilize Zhenjiang Sanwei belt buckets. Belt material: PVC/High-strength EP (for regions below -20°C). Bucket material: High-density polyethylene/High-impact nylon. Power source: Guomao motor reducer.
Hoist Tower2.2mx2.2mM26 //Hot-dip galvanized material, assembled on-site. Primary materials include galvanized angle steel, platforms, and steel grating for steps. Platforms and spiral staircases are installed at 2-meter intervals. 
An inspection platform is provided at the hoist connection point, secured with Grade 8.8 galvanized bolts.
Wear-Resistant Square Chute Pipe250*250Set//Wear-resistant assembly, fabricated from 2mm thick galvanized cold-rolled steel plate, with 10mm polymer wear liner embedded internally, including transition connectors.
Suspended ladder Set//For easy maintenance of galvanized square tubes.
10 BufferHCQ25//Constructed from 3mm thick plates, grain is fed through the silo top. Made from hot-dip galvanized steel plates to prevent grain breakage.
11 Manual/Electric GateTZMS25Set0.550.55Frame: 5mm/Q235 steel, gate plate: 6mm/Q235 steel, domestic motor. Flexible opening for silo discharge, adjustable flow rate at silo base, effectively conserving vertical space.
Part Three: Electrical Section
12 Electrical Control System Set  Control cabinet, cables, wires, and cable trays between the control cabinet and equipment. 1. The electrical control cabinet shall be placed beside the hoist of this system. 2. Components within the electrical control cabinet shall be manufactured using high-quality domestic electronic components compliant with national standards. 3. The quotation includes all necessary cables, conduit, and cable trays from the electrical control room to the equipment. 4. The electrical control room shall be constructed by the customer. 5. If the distance between the control cabinet and this system exceeds 10 meters, a contract must be signed to determine the precise location.
Part IV: Supplementary Section
13 Auxiliary materials Zong  Includes adapter, chute, and spiral staircase extension; oxygen, acetylene, welding rods, paint, etc.

Key words:

500-ton mechanical steel silo

Message

* Note: Please be sure to fill in the information accurately and keep communication open. We will contact you as soon as possible!

Submit

Related Products

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT